Difference between revisions of "DC I/O Paper Template"

From Design Computation
Jump to: navigation, search
(Heading & Foorter)
(Other Notes)
Line 159: Line 159:
 
Add DC logo and paper identification number to Footer
 
Add DC logo and paper identification number to Footer
  
=Other Notes=
+
==Other Notes==
 
Please ensure that all template text is removed from your conference paper prior to submission to the conference. Failure to remove template text from your paper may result in your paper not being published.
 
Please ensure that all template text is removed from your conference paper prior to submission to the conference. Failure to remove template text from your paper may result in your paper not being published.
  

Revision as of 19:16, 5 September 2019


Paper Structure

DC I/O conference papers are divided into two main parts and references. The first part is a proposition and the second part is the implementation, in a codified form, of the proposition.

Part 1: Proposition

Title & Subtitle

Design Computation Conference (DC/IO) paper template Sub-titles are not captured in Xplore

Cover Image

A full with or a series of images aligned to full width.

Authors

1ST GIVEN NAME SURNAME1, 2ST GIVEN NAME SURNAME2, 3ST GIVEN NAME SURNAME3, ETCETC. 1Dept. name of the organization (of Affiliation), City, Country. 2Dept. name of organization (of Affiliation), City, Country. EtcEtc. 1email@address.com or ORCID, 2 email@address.com or ORCID, 3 email@address.com or ORCID,

Abstract

This electronic document is a “live” template and already defines the components of your paper [title, text, heads, etc.] in its style sheet. *CRITICAL: Do Not Use Symbols, Special Characters, Footnotes, or Math in Paper Title or Abstract. (Abstract)

Keywords

Component, Formatting, Style, Styling, Insert (Key Words)

Introduction

This includes hypothesis.

Part 2: Implementation

Algorithm Introduction

Input

Output

References

For this template, we use Harvard (no abbreviations) within square brackets [Eason et al. 1955]. The sentence punctuation follows the bracket [Strunk and White 1999]. Refer simply to the reference, as in [Shalunts 2015] - do not use “Ref. [Shalunts 2015]” or “reference ”. Number footnotes separately in superscripts. Place the actual footnote at the bottom of the column in which it was cited. Do not put footnotes in the abstract or reference list. Use letters for table footnotes. Unless there are six authors or more give all authors’ names; do not use “et al.”. Papers that have not been published, even if they have been submitted for publication, should be cited as “unpublished” [K. Elissa]. Papers that have been accepted for publication should be cited as “in press” [Nicole]. Capitalize only the first word in a paper title, except for proper nouns and element symbols. For papers published in translation journals, please give the English citation first, followed by the original foreign-language citation [Yorozu 1982]. For Creative Commons articles shared in the Design Computation Wiki (or DCWIKI) [Maciel 2017], always check the initiator of the page (under ‘View history’) and add the correct link to the page. In instances where the originator of the article is not identifiable, please refer to the wiki itself [DCWIKI 2019]. Please note that all articles in the DCWIKI is shared under the ‘Attribution-NonCommercial-ShareAlike 4.0 International’ licence.

References Samples

Repositories can be referenced using the authors name [Maciel 2019] or the repository’s name [Project X 2019].

DCWIKI. 2019. Article Title. Design Computation Wiki. http://wiki.designcomputation.org/home/index.php/Main_Page.

EASON, G., NOBLE, B., AND SNEDDON, I.N. 1955. On certain integrals of Lipschitz-Hankel type involving products of Bessel functions. Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences 247, 935, 529–551.

K. ELISSA. Title of paper with only first word capitalized. Unpublished.

MACIEL, A. 2017. Article Title. Design Computation Wiki. http://wiki.designcomputation.org/home/index.php/Main_Page.

MACIEL, A. 2019. Design Computation GitHub Repository. GitHub. https://github.com/DesignComputation.

NICOLE, R. Title of paper with only first word capitalized. In press.

PROJECT X. 2019. Design Computation GitHub Repository. GitHub. https://github.com/DesignComputation.

SHALUNTS, G. 2015. Architectural Style Classification of Building Facade Towers. Advances in Visual Computing, Springer International Publishing, 285–294.

STRUNK, W. AND WHITE, E.B. 1999. The Elements of Style, Fourth Edition. Longman.

YOROZU, Y. 1982. Title of paper with only first word capitalized. Proceeding Title.Translated by J. Magn. Japan, vol. 2, pp. 740–741, August 1987 [Digests 9th Annual Conf. Magnetics Japan, p. 301, 1982].

References Management Systems

Consider using Zotero, EndNote or Mendeley.

Paper Format and Writing Guidelines

Heading 1 / Indexed 1

All standard paper components have been specified for three reasons: (1) ease of use when formatting individual papers, (2) automatic compliance to electronic requirements that facilitate the concurrent or later production of electronic products, and (3) conformity of style throughout conference proceedings. Margins, column widths, line spacing, and type styles are built-in; examples of the type styles are provided throughout this document and are identified in italic type, within parentheses, following the example. Some components, such as multi-leveled equations, graphics, and tables are not prescribed, although the various table text styles are provided. The formatter will need to create these components, incorporating the applicable criteria that follow.

Selecting the right Template

First, confirm that you have the correct, most up to date template for your paper size. This template has been tailored for output on the A4 paper size.

Maintaining the Integrity of the Specifications

The template is used to format your paper and style the text. All margins, column widths, line spaces, and text fonts are prescribed; please do not alter them. You may note peculiarities. For example, the head margin in this template measures proportionately more than is customary. This measurement and others are deliberate, using specifications that anticipate your paper as one part of the entire proceedings, and not as an independent document. Please do not revise any of the current designations.

Prepare your paper before styling

Before you begin to format your paper, first write and save the content as a separate text file. Complete all content and organizational editing before formatting. Please note sections A-D below for more information on proofreading, spelling and grammar. Keep your text and graphic files separate until after the text has been formatted and styled. Do not use hard tabs, and limit use of hard returns to only one return at the end of a paragraph. Do not add any kind of pagination anywhere in the paper. Do not number text heads-the template will do that for you.

Abbreviations and Acronyms

Define abbreviations and acronyms the first time they are used in the text, even after they have been defined in the abstract. Abbreviations such as IEEE, SI, MKS, CGS, sc, dc, and rms do not have to be defined. Do not use abbreviations in the title or heads unless they are unavoidable.

Units

  • Use either SI (MKS) or CGS as primary units. (SI units are encouraged.) English units may be used as secondary units (in parentheses). An exception would be the use of English units as identifiers in trade, such as “3.5-inch disk drive”.
  • Avoid combining SI and CGS units, such as current in amperes and magnetic field in oersteds. This often leads to confusion because equations do not balance dimensionally. If you must use mixed units, clearly state the units for each quantity that you use in an equation.
  • Do not mix complete spellings and abbreviations of units: “Wb/m2” or “webers per square meter”, not “webers/m2”. Spell out units when they appear in text: “. . . a few henries”, not “. . . a few H”.
  • Use a zero before decimal points: “0.25”, not “.25”. Use “cm3”, not “cc”. (bullet list)

Equations

The equations are an exception to the prescribed specifications of this template. You will need to determine whether or not your equation should be typed using either the Times New Roman or the Symbol font (please no other font). To create multileveled equations, it may be necessary to treat the equation as a graphic and insert it into the text after your paper is styled.

Number equations consecutively. Equation numbers, within parentheses, are to position flush right, as in (1), using a right tab stop. To make your equations more compact, you may use the solidus ( / ), the exp function, or appropriate exponents. Italicize Roman symbols for quantities and variables, but not Greek symbols. Use a long dash rather than a hyphen for a minus sign. Punctuate equations with commas or periods when they are part of a sentence, as in:


ab 

Note that the equation is centered using a center tab stop. Be sure that the symbols in your equation have been defined before or immediately following the equation. Use “(1)”, not “Eq. (1)” or “equation (1)”, except at the beginning of a sentence: “Equation (1) is . . .”

Some Common Mistakes

  • The word “data” is plural, not singular.
  • The subscript for the permeability of vacuum 0, and other common scientific constants, is zero with subscript formatting, not a lowercase letter “o”.
  • In American English, commas, semicolons, periods, question and exclamation marks are located within quotation marks only when a complete thought or name is cited, such as a title or full quotation. When quotation marks are used, instead of a bold or italic typeface, to highlight a word or phrase, punctuation should appear outside of the quotation marks. A parenthetical phrase or statement at the end of a sentence is punctuated outside of the closing parenthesis (like this). (A parenthetical sentence is punctuated within the parentheses.)
  • A graph within a graph is an “inset”, not an “insert”. The word alternatively is preferred to the word “alternately” (unless you really mean something that alternates).
  • Do not use the word “essentially” to mean “approximately” or “effectively”.
  • In your paper title, if the words “that uses” can accurately replace the word “using”, capitalize the “u”; if not, keep using lower-cased.
  • Be aware of the different meanings of the homophones “affect” and “effect”, “complement” and “compliment”, “discreet” and “discrete”, “principal” and “principle”.
  • Do not confuse “imply” and “infer”.
  • The prefix “non” is not a word; it should be joined to the word it modifies, usually without a hyphen.
  • There is no period after the “et” in the Latin abbreviation “et al.”.
  • The abbreviation “i.e.” means “that is”, and the abbreviation “e.g.” means “for example”.

An excellent style manual for science writers is Strunk and White [1999].

Applying the Template

After the text edit has been completed, the paper is ready for the template. Duplicate the template file by using the Save As command, and use the naming convention prescribed by your conference for the name of your paper. In this newly created file, highlight all of the contents and import your prepared text file. You are now ready to style your paper; use the scroll down window on the left of the MS Word Formatting toolbar.

Authors and Affiliations

The template is designed for, but not limited to, six authors. A minimum of one author is required for all conference articles. Author names should be listed starting from left to right and then moving down to the next line. This is the author sequence that will be used in future citations and by indexing services. Names should not be listed in columns nor group by affiliation. Please keep your affiliations as succinct as possible (for example, do not differentiate among departments of the same organization). For papers with more than six authors: Add author names horizontally, moving to a third row if needed for more than 8 authors. For papers with less than six authors: To change the default, adjust the template as follows. Selection: Highlight all author and affiliation lines. Change number of columns: Select the Columns icon from the MS Word Standard toolbar and then select the correct number of columns from the selection palette. Deletion: Delete the author and affiliation lines for the extra authors.

Identify the Headings

Headings, or heads, are organizational devices that guide the reader through your paper. There are two types: component heads and text heads. Component heads identify the different components of your paper and are not topically subordinate to each other. Examples include Acknowledgments and References and, for these, the correct style to use is “Heading 5”. Use “figure caption” for your Figure captions, and “table head” for your table title. Run-in heads, such as “Abstract”, will require you to apply a style (in this case, italic) in addition to the style provided by the drop down menu to differentiate the head from the text. Text heads organize the topics on a relational, hierarchical basis. For example, the paper title is the primary text head because all subsequent material relates and elaborates on this one topic. If there are two or more sub-topics, the next level head (uppercase Roman numerals) should be used and, conversely, if there are not at least two sub-topics, then no subheads should be introduced. Styles named “Heading 1”, “Heading 2”, “Heading 3”, and “Heading 4” are prescribed.

Figures and Tables

Positioning Figures and Tables: Place figures and tables at the top and bottom of columns. Avoid placing them in the middle of columns. Large figures and tables may span across both columns. Figure captions should be below the figures; table heads should appear above the tables. Insert figures and tables after they are cited in the text. Use the abbreviation “Fig. 1”, even at the beginning of a sentence.

[Table 1] Sample of a Table footnote. (Table footnote) Fig. 2. Example of a figure caption. (figure caption)

Figure Labels: Use 8 point Times New Roman for Figure labels. Use words rather than symbols or abbreviations when writing Figure axis labels to avoid confusing the reader. As an example, write the quantity “Magnetization”, or “Magnetization, M”, not just “M”. If including units in the label, present them within parentheses. Do not label axes only with units. In the example, write “Magnetization (A/m)” or “Magnetization {A[m(1)]}”, not just “A/m”. Do not label axes with a ratio of quantities and units. For example, write “Temperature (K)”, not “Temperature/K”.

ACKNOWLEDGMENT (HEADING 5)

The preferred spelling of the word “acknowledgment” in America is without an “e” after the “g”. Avoid the stilted expression “one of us (R. B. G.) thanks ...”. Instead, try “R. B. G. thanks...”. Put sponsor acknowledgments in the unnumbered footnote on the first page.

Graphics

A graphic description:

References

(HEADING 1 / NO INDEX NUMBER)

Heading & Foorter

Add QI to DCWIKI article if appropriate. Please note DCWIKI operates under Creative Commons licensing. Add DC logo and paper identification number to Footer

Other Notes

Please ensure that all template text is removed from your conference paper prior to submission to the conference. Failure to remove template text from your paper may result in your paper not being published.

Cross-References

Recommended Reading

Wikipedia MoS