Difference between revisions of "User:SandraKinsella3"
From Design Computation
m |
m |
||
| Line 1: | Line 1: | ||
| − | + | To determine if the thermistor is at fault, use a multimeter to test it for continuity. The following table shows what you can expect to pay for each size split-system unit:. Leak at the air line fitting. | |
Revision as of 11:28, 25 December 2018
To determine if the thermistor is at fault, use a multimeter to test it for continuity. The following table shows what you can expect to pay for each size split-system unit:. Leak at the air line fitting.
