In Search of a Dialogue for Manufacturing Conformance: When Precise Geometry is Paradoxically Imprecise Design Intent

From Design Computation
Revision as of 22:14, 4 May 2022 by Abel Maciel (talk | contribs)

Jump to: navigation, search
DCIO2021-Logo.png
DC I/O 2021 Keynote Paper by CHRIS LEUNG.
DCIO-2021 C.Leung.png

Abstract

An article advocating in favour of introducing the Geometrical Product Specification (GPS) framework to pre-fabrication, pre-assembly and installation sections of the construction industry where designers, makers and inspectors can have clear and unambiguous terms of reference and rules of interpretation with which to discuss and negotiate in a dialogue between functional requirements and design specifications that can be modelled, manufactured and measured for conformance.

Presentation

Left Video Recording.

Conference Paper

Left Conference Paper.

Keywords

Industrialised manufacturing, Geometrical Product Specification (GPS), Tolerance management, Industrial Standards and Pre-fabrication/Pre-assembly.

Reference

DOI: https://doi.org/10.47330/DCIO.2021.VQSV3609

Bibliography

  • ALBUS, JUTTA, (2018), "Construction and design manual prefabricated housing volume I: Technologies and methods", DOM Publishers, ISBN: 978-3-8692-2427-5
  • BALLAST, DAVID, (2007), "Handbook of construction tolerances", New Jersey, Wiley, ISBN: 978-0-4719-3151-5
  • BENNICH, PER AND NIELSEN, HENRIK, "Turning ideas into reality: An overview of GPS a cost saving tool", (2005), Institute for Geometrical Product Specification, Vaerloese, www.ifGPS.com (Accessed 4th April 2021)
  • BRENT, DOUG, (2018), "Connected construction", Digital Construction Week (DCW), 17-18th October 2018, London
  • BRYDENWOOD, (2018), "Platforms: Bridging the gap between construction + manufacturing", Book 2, Bryden Wood Technology Limited, London
  • BSI, (1990), "Building tolerances - Measurement of buildings and building products-Part 1: Methods and instruments", British Standards Institute, London, BS 7307-1, ISO 7976-1, ISBN: 0-5801-8490-0
  • BSI, (1990)a, "Guide to accuracy in building", British Standards Institute, London, BS 5606, ISBN: 0-5801-8657-1
  • BSI, (1990)b, "Method for presentation of dimensional accuracy data in building constructions", British Standards Institute, London, BS 7308, ISO 7737, ISBN: 0-5801-8494-3
  • BSI, (1990)c, "Building tolerances - Measurement of buildings and building products-Part 2: Position of measuring points", British Standards Institute, London, BS7370-2, ISO7976-2, ISBN: 0-5801-8491-9
  • BSI, (2017), "Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for verifying conformity or nonconformity with specifications", British Standards Institute, London, BS EN ISO 14253‑1, ISBN: 978-0-5809-2446-0
  • DAVIES, COLIN, (2005), Chap. 6, "Down with the system", pp. 130-147 in "The prefabricated home", London, ISBN: 978-1-8618-9243-0
  • EGAN, JOHN, (1998), "Rethinking construction: The report of the construction task force", The Department of Trade and Industry, London, URN 03/951
  • FARMER, MARK, (2016), "The Farmer review of the UK construction labour model", Construction Leadership Council (CLC)
  • GANN, DAVID M., (1996), "Construction as a manufacturing process? Similarities and differences between industrialized housing and car production in Japan", Construction Management & Economics, 14:5, pp. 437-450, DOI: 10.1080/014461996373304, ISSN: 0144-6193 (Print)
  • GIBB, ALISTAIR G.F., (1999), "Off-site fabrication: Prefabrication, pre-assembly and modularization", New York, ISBN: 0-4703-7836-0
  • GULLING, DANA K., (2018), "Manufacturing architecture: An architect's guide to custom processes, materials and applications", Laurence King, London, ISBN: 978-1-7862-7133-4
  • HENZOLD, GEORG, (2006), "Geometrical dimensioning and tolerancing for design, manufacturing and inspection", Elsevier, Oxford, ISBN-13: 978-0-7506-6738-8
  • HUMIENNY, ZBIGNIEW, (2009), "State of art in standardization in GPS area" in CIRP Journal of Manufacturing Science and Technology 2, doi:10.1016/j.cirpj.2009.06.007, ISSN: 1755-5817
  • LATHAM, MICHAEL, (1994), "Constructing the team: Final report of the government/industry review of procurement and contractual arrangements in the UK construction industry", HMSO, London, ISBN: 0-1175-2994-X
  • LIGGETT, JOHN V., (1970), “Fundamentals of position tolerance”, Manufacturing data series, Society of Manufacturing engineers, Michigan, Library of Congress: 73-114335, ISBN: 0-8726-3020-x
  • MILBERG, COLIN T., (2006), "Application of tolerance management to civil systems", Ph.D thesis, University of California, Berkeley
  • SUGA, NOBUO AND ROLLINGS, PETER, (2016), “Mitutoyo metrology handbook: The science of measurement”, Second edition, Mitutoyo (UK), Andover, ISBN-13: 978-0-9556-1331-9
  • MORSE, EDWARD, (2019), "Design for metrology: a new idea?", pp. 165-168 in CIRP Design 2019, Elsevier, DOI:10.1016/j.procir.2019.04.240, ISSN: 2212-8271
  • PARKER, STANLEY, (1956), “Drawings and dimensions”, Sir Isaac Pitman & Sons, London
  • POLIMENI, JOHN M. AND MAYUMI, KOZO AND GIAMPIETRO, M. AND ALCOTT, BLAKE, (2015), "The Jevons' paradox and the myth of resource efficiency improvements", Taylor and Francis, London, ISBN 13: 978-1-1388-6695-9
  • TALEBI, SAEED AND KOSKELA, LAURI AND TZORTZOPOULOS, PATRICIA AND KAGIOGLOU, MICHAIL AND KRULIKOWSKI, ALEX, (2020), "Deploying geometric dimensioning and tolerancing in Construction", in Vol. 10, Issue 4 of Buildings, MDPI, doi:10.3390/buildings10040062, EISSN: 2075-5309
  • TALEBI, SAEED AND KOSKELA, LAURI AND TZORTZOPOULOS, PATRICIA, (2016), “Critical review of Tolerance Management in Construction”, pp. 63-72 in Section 4 of Proc. 24th Ann. Conf. of the Int’l. Group for Lean Construction, Boston, MA, USA
  • WIGLEY, MARK, Chap. "The low-flying architecture of Jean Prouvé", pp. 137-159 in "Jean Prouvé: architect for better days", (2017), Giraldeau, François-Luc (ed.), Phaidon, London, ISBN-13: 978-0-7148-7555-2
Retrieved from "http://wiki.designcomputation.org/home/index.php?title=In_Search_of_a_Dialogue_for_Manufacturing_Conformance:_When_Precise_Geometry_is_Paradoxically_Imprecise_Design_Intent&oldid=26541"