In Search of a Dialogue for Manufacturing Conformance: When Precise Geometry is Paradoxically Imprecise Design Intent

From Design Computation
Revision as of 01:10, 21 April 2022 by Abel Maciel (talk | contribs) (→‎Bibliography)

Jump to: navigation, search
DCIO2021-Logo.png
DC I/O 2021 Keynote Paper by CHRIS LEUNG.
800px

Abstract

PENDING

Presentation

Left Video Recording.

Conference Paper

Left Conference Paper.

Keywords

PENDING

Reference

DOI: https://doi.org/10.47330/DCIO.2021.VQSV3609

Bibliography

  • ALBUS, JUTTA, (2018), "Construction and design manual prefabricated housing volume I: Technologies and methods", DOM Publishers, ISBN: 978-3-8692-2427-5
  • BALLAST, DAVID, (2007), "Handbook of construction tolerances", New Jersey, Wiley, ISBN: 978-0-4719-3151-5
  • BENNICH, PER AND NIELSEN, HENRIK, "Turning ideas into reality: An overview of GPS a cost saving tool", (2005), Institute for Geometrical Product Specification, Vaerloese, www.ifGPS.com (Accessed 4th April 2021)
  • BRENT, DOUG, (2018), "Connected construction", Digital Construction Week (DCW), 17-18th October 2018, London
  • BRYDENWOOD, (2018), "Platforms: Bridging the gap between construction + manufacturing", Book 2, Bryden Wood Technology Limited, London
  • BSI, (1990), "Building tolerances - Measurement of buildings and building products-Part 1: Methods and instruments", British Standards Institute, London, BS 7307-1, ISO 7976-1, ISBN: 0-5801-8490-0
  • BSI, (1990)a, "Guide to accuracy in building", British Standards Institute, London, BS 5606, ISBN: 0-5801-8657-1
  • BSI, (1990)b, "Method for presentation of dimensional accuracy data in building constructions", British Standards Institute, London, BS 7308, ISO 7737, ISBN: 0-5801-8494-3
  • BSI, (1990)c, "Building tolerances - Measurement of buildings and building products-Part 2: Position of measuring points", British Standards Institute, London, BS7370-2, ISO7976-2, ISBN: 0-5801-8491-9
  • BSI, (2017), "Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment Part 1: Decision rules for verifying conformity or nonconformity with specifications", British Standards Institute, London, BS EN ISO 14253‑1, ISBN: 978-0-5809-2446-0
  • DAVIES, COLIN, (2005), Chap. 6, "Down with the system", pp. 130-147 in "The prefabricated home", London, ISBN: 978-1-8618-9243-0
  • EGAN, JOHN, (1998), "Rethinking construction: The report of the construction task force", The Department of Trade and Industry, London, URN 03/951
  • FARMER, MARK, (2016), "The Farmer review of the UK construction labour model", Construction Leadership Council (CLC)
  • GANN, DAVID M., (1996), "Construction as a manufacturing process? Similarities and differences between industrialized housing and car production in Japan", Construction Management & Economics, 14:5, pp. 437-450, DOI: 10.1080/014461996373304, ISSN: 0144-6193 (Print)
  • GIBB, ALISTAIR G.F., (1999), "Off-site fabrication: Prefabrication, pre-assembly and modularization", New York, ISBN: 0-4703-7836-0
  • GULLING, DANA K., (2018), "Manufacturing architecture: An architect's guide to custom processes, materials and applications", Laurence King, London, ISBN: 978-1-7862-7133-4
  • HENZOLD, GEORG, (2006), "Geometrical dimensioning and tolerancing for design, manufacturing and inspection", Elsevier, Oxford, ISBN-13: 978-0-7506-6738-8
  • HUMIENNY, ZBIGNIEW, (2009), "State of art in standardization in GPS area" in CIRP Journal of Manufacturing Science and Technology 2, doi:10.1016/j.cirpj.2009.06.007, ISSN: 1755-5817
  • LATHAM, MICHAEL, (1994), "Constructing the team: Final report of the government/industry review of procurement and contractual arrangements in the UK construction industry", HMSO, London, ISBN: 0-1175-2994-X
  • LIGGETT, JOHN V., (1970), “Fundamentals of position tolerance”, Manufacturing data series, Society of Manufacturing engineers, Michigan, Library of Congress: 73-114335, ISBN: 0-8726-3020-x
  • MILBERG, COLIN T., (2006), "Application of tolerance management to civil systems", Ph.D thesis, University of California, Berkeley
  • SUGA, NOBUO AND ROLLINGS, PETER, (2016), “Mitutoyo metrology handbook: The science of measurement”, Second edition, Mitutoyo (UK), Andover, ISBN-13: 978-0-9556-1331-9
  • MORSE, EDWARD, (2019), "Design for metrology: a new idea?", pp. 165-168 in CIRP Design 2019, Elsevier, DOI:10.1016/j.procir.2019.04.240, ISSN: 2212-8271
  • PARKER, STANLEY, (1956), “Drawings and dimensions”, Sir Isaac Pitman & Sons, London
  • POLIMENI, JOHN M. AND MAYUMI, KOZO AND GIAMPIETRO, M. AND ALCOTT, BLAKE, (2015), "The Jevons' paradox and the myth of resource efficiency improvements", Taylor and Francis, London, ISBN 13: 978-1-1388-6695-9
  • TALEBI, SAEED AND KOSKELA, LAURI AND TZORTZOPOULOS, PATRICIA AND KAGIOGLOU, MICHAIL AND KRULIKOWSKI, ALEX, (2020), "Deploying geometric dimensioning and tolerancing in Construction", in Vol. 10, Issue 4 of Buildings, MDPI, doi:10.3390/buildings10040062, EISSN: 2075-5309
  • TALEBI, SAEED AND KOSKELA, LAURI AND TZORTZOPOULOS, PATRICIA, (2016), “Critical review of Tolerance Management in Construction”, pp. 63-72 in Section 4 of Proc. 24th Ann. Conf. of the Int’l. Group for Lean Construction, Boston, MA, USA
  • WIGLEY, MARK, Chap. "The low-flying architecture of Jean Prouvé", pp. 137-159 in "Jean Prouvé: architect for better days", (2017), Giraldeau, François-Luc (ed.), Phaidon, London, ISBN-13: 978-0-7148-7555-2
Retrieved from "http://wiki.designcomputation.org/home/index.php?title=In_Search_of_a_Dialogue_for_Manufacturing_Conformance:_When_Precise_Geometry_is_Paradoxically_Imprecise_Design_Intent&oldid=26453"